Hands-On: Lian Li's LCD Screen fans turn heads and are surprisingly affordable, but not as configurable as I'd like (2024)

When I started building PCs, the only way to change the look of a fan was to buy

. So I was intrigued when

at Computex earlier this year, with their embedded, customizable screens, even though the viewing angles on those early units were pretty bad. Now that I've spent some time with the final units, which should be available now alongside a version without screens, I can say that they've fixed the viewing angle issues. Images, gifs, and movies displayed on the 1.6-inch, 400x400-pixel screens are bright and vivid. And while I wouldn't rely solely on these spinners to cool your highly overclocked high-end gaming rig, they do a decent enough job of moving air through your PC.

But I also ran into some frustrating issues while installing and setting up the fans in a

case. For starters, the display lives on one side of the fan, which is fine if you want the fan's screen on the outside of the front of the case as an intake, or the inside of the case for exhaust. But if you want to, say, mount some fans as intake and be able to see the screens through the glass side panel of your case as opposed to at the front, you'll have to buy reverse models (which Lian Li also offers) with the screen on the opposite side. That's not a huge deal, but it requires some planning before you buy. And if you buy a three-pack with the required controller hub, you're going to get three with the screens facing the same way.

But, this leads me to the other annoyance: The controller box for the Lian Li Uni Fans still needs to connect to a three-pin RGB header and a USB 2.0 header on your motherboard and, get this, a six-pin PCIe connector is required for power. I appreciate the controller box probably needs a lot of power considering you can have up to six LCD fans or 10 non-LCD fans connected to the four ports on the controller box (Lian Li says three LCD fans max per port). But in today's world of power-gobbling GPUs and 12VHPWR connectors, there often aren't many (or any) spare six-pin power connectors to go around. And apparently the PCIe power connector isn't always enough, as the company also supplies a SATA power cable that Lian Li says you should use for the sake of stability at the end of long fan chains. In order to install these fans in my existing build, I had to step down to a lower-end graphics card to free up a PCIe power plug. Otherwise, I would have had to install a different power supply.

Lian Li sent three of its LCD Uni Fans and three standard (non-LCD) Uni Fans for testing. As I noted up top, I had originally intended to install one of the LCD fans in the front, sandwiched between two non-LCD fans, and a second LCD fan in the rear of the case for exhaust and monitoring temperatures (as you can see in one of the photos above with the three fans linked together). I set it up that way originally, and the rear fan refused to work. In fact, no other fans I plugged into any of the other ports would work. Turns out, as I discovered, you can't mix fan types in the same chain.

Of course, with any RGB cooling product, and especially one with customizable screens, you're going to have to deal with some kind of control software. I found Lian Li's L-Connect 3 software pleasingly intuitive, even if the design is a bit utilitarian. There are also at least a couple of bugs that need fixing, which I'll touch on shortly.

You can use the software to monitor system settings and adjust fan speed and profiles. But since I'm focusing on the LCD fans here, I'll stick mostly to the screen and RGB settings. The latter features the usual options like static color, meteor, rainbow, and stack (14 options total), and it all looks good as the colors move along the edge of the fans inside your case.

You can also add photos (JPG or PNG), GIFs, or video (MP4) to the LCD fans, and doing so is as simple as selecting a type from a drop-down and navigating to your desired file and then selecting and applying it, either to one LCD fan or all of them. Then you can rotate it via a button below the preview screen until it's in the correct orientation.

Every GIF, image and MP4 video I added to the fans displayed or played back pretty much as I expected, although you will want to crop things, because the 400 x 400-pixel fan display has a 1:1 ratio. The 16:9 videos of Scotland that I added to the TL LCD fans were very squished. Interestingly, the software actually seems to transcode videos as you select them, as it takes several seconds for long / large videos to load once you select them, and the CPU use spikes to 100% during that time.

Aside from squishing the aspect ratio down to 1:1, the videos I tried did otherwise play back flawlessly. I wouldn't recommend trying to watch a movie on a fan screen, though. Apart from the circular shape, tiny size, and sub-HD resolution, there are no media controls – the videos just loop. I did, though, at one point have three separate videos playing on the three fan screens on the front of the case at once. As is often our mantra here at Tom's Hardware, I did this to see if it could be done, not because it should be done.

Realistically, after the novelty wears off, many will want to use the TL LCD fans to monitor system stats and temps. To do that, you can choose Sensor from the LCD drop-down menu in L-Connect 3, and you'll see options for CPU and GPU temperature and load, as well as fan RPM. You can choose the color of various aspects of your status display (things like background, graphics, and text), as well as from three different styles.

Oddly, though, every time I chose the third style option, the screen defaulted to all white, and no amount of choosing different colors changed the white screen. It's as if the third style has just been left blank by the programmers. Hopefully, this will be fixed in an L-Connect 3 software update soon.

Much like

the TL LCD Uni Fans are going to be a polarizing case accessory. For those who only care about performance, there are, no doubt, screenless fans that will offer better airflow for less money, letting you put that budget toward a better GPU or a roomier, speedier SSD. But for those who like pretty lights and want to truly be able to customize the look of their PC – or monitor important stats at a glance without taking up precious monitor space, the TL LCD fans offer up something different while still doing a decent job of cooling your case's interior. They also aren't particularly loud, although I didn't do any temperature or cooling testing. If you buy these, you're buying them for aesthetics, not because they're going to outperform your Noctua or Be Quiet Fans.

You will, though, have to pay for the looks and versatility that the TL LCD fans bring. A three-pack and the controller box is expected to cost $150. In some ways, that's not a massive outlay considering the non-LCD version of the TL fans is priced at $110 for the same three-pack and controller bundle. Heck,

fans are $160 for a three-pack plus controller – and they don't have screens at all. So as premium fans go, the Uni Fan TL spinners are spendy, but not the most expensive.

I also like that single packs of the TL LCD fans can be picked up for a surprisingly reasonable $47. So you could get yourself three non-LCD Uni Fans and pick up a couple extra LCD fans for just over $200. Just remember that you can't connect the LCD and non-LCD Uni Fans together, which is really a shame. And be sure to plan which side of the fan you want your screen to show up on (standard for an intake with the screen facing outside the case or an exhaust with the screen facing inside, or reverse for… the reverse of that). Because while not everyone will want to outfit their PC with LCD fans, no one wants to spend a lot of money for fans with screens, only to have those screens to be hidden because they're facing the wrong direction.

Matt Safford

After a rough start with the Mattel Aquarius as a child, Matt built his first PC in the late 1990s and ventured into mild PC modding in the early 2000s. He’s spent the last 15 years covering emerging technology for Smithsonian, Popular Science, and Consumer Reports, while testing components and PCs for Computer Shopper, PCMag and Digital Trends.